The world's best flyfishing site.
Skagit & Scandi - Simplified

Español

Manual de Lanzado
Sección de Carlos
The Downloads

Falsecast

Monday: Paul Arden
Tuesday: Harps
Wednesday: Bernd Ziesche
Thursday: Mr T.
Friday: Ray
Saturday: Viking Lars
Sunday: Anvar Maliutov

Ronan's report


Wednesday 3rd June, 2009

With all this hype about "modern, easier to cast Spey lines", I’d like to help simplify some of the buzz words that you may come across when eavesdropping on a conversation about these life changing lines.

First, let’s start with "Skagit". Quite simply put, Skagit is a type of shooting head that is designed to throw big flies and sink tips with little to no room behind you. Now, for the readers digest version. Up here in the Pacific Northwest, we are faced with many occasions when you can only wade out 5-6 feet from the bank, with your next step in being over your head! Fishing at a distance really isn’t the goal here. The idea is to just get your fly out there far enough to "swing" it into the bucket. Given a traditional head length of say, 50-75 feet, it becomes difficult to get a cast out with this little room, much less turn over a fly of substantial (4+ inches) size and weight! I have yet to find a fly that is too large for steelhead (my largest fish thus far came on a 6'' fly). You might ask, “now why would you WANT to fish such a large fly?" Well, it’s fun. It’s intriguing to think of what this beautiful 17lb native fish is thinking when it sees something that large and says to it self "get that sh!t out of my face!" or "hey! purple is my faaaavorite color" or "is that a shrimp?? I’m famished!!" So again, the Skagit head was designed to turn over these flies in what some may feel an industrial manner. But needless to say, it gets the job done well. And what is the secret? The taper. Picture a very short rear taper at roughly 5% of the total head length, followed by the thickest part of the line (the body) taking up a full 80% of the head length, and then the front taper in the remaining 15% of the head length. The sink tip and fly in front of this powerhouse has NO CHOICE but to straighten out. Whammo!

The next buzzword is "Scandi". Most of you can figure this to be short for "Scandinavian", which describes the style of line and casting stroke that we have adapted from the northern Europeans. So, where the Skagit lines are designed to throw large, heavy flies and sink tips, these lines are more designed for floating to light sink tip work with small flies. To get flies very deep, a full sinking shooting head is typically employed. Along with their intended use, another difference between these two styles of lines is the taper. So, if the Skagit taper is shaped more like a Foster’s beer can, these Scandi heads are more like of an old Coke bottle. Picture it. A short rear taper at roughly 5% of the total head length, followed the flat taper in the body taking up 35% of the total head length, and then the remaining 60% of the head length going to the front taper. So by design, this style of line doesn’t possess the power and mass to throw the chickens mentioned above, but will jump at the opportunity to propel smaller ( < 2'') flies delicately (due to the longer front taper) and with minimal back cast room. These types of shooting head lines have grown a huge following among summer steelhead anglers swinging traditional flies and skaters for these grabby fish. And, while the Skagit taper handles, say, like a Dodge Ram, these Scandis are more like that BMW M3.

Both of these lines have a purpose, with each one doing its job incredibly well. In the same way that you wouldn’t take your M3 off-roading, you wouldn’t take your Dodge to the track. Well, I suppose you could. I do remember seeing a diesel F150 smoke some sports car in a drag race on YouTube.

Fish on fellow Jedis...

Brian

-------------------------------------

Great Stuff! Brian Chou is a Portland, OR based CI and my personal Gear Nerd. I've learned alot from him in a short time, as you might guess from the FP. You can find him teaching classes and giving demos on a regular basis throughout western Oregon and Washington. The first time we fished together, I schooled him badly (at his fishing spot, on a borrowed rod, with his fly no less), despite the fact that I can’t cast nearly as pretty as he can.

I'm hoping to be back next Wednesday with some major bonefishporn for the POD.

Fish On,
Matt


Pic Of Day

SL Promotions

Shop:

THE SEXYLOOPS HOT TORPEDO - Available Here.

SEXYLOOPS SCHOOLS - Flycasting in England and Hungary. Contact Paul Arden for more info.

Sexyloops on Facebook: www.facebook.com/Sexyloops. Sexyloops on YouTube: www.YouTube/SexyloopsTV. This is Snapcast - our irregular monthly mailshot!


<-- Copyright Notice -->